Gold's Gym GGSY3066.1 manual Arm Assembly

Arm Assembly

10.Attach the Butterfly Frame Brace (6) to the Upright (2) with two M8 x 80mm Bolts (100), two M8 Washers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet.

11.Apply grease in the locations shown. Insert a 56.5mm Spacer (69) into the indicated hole in the Leg Lever (12). Attach the Leg Lever to the Front Leg (10) with an M10 x 61mm Bolt Set (116).

Make sure that the indicated rod is oriented as shown. Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg.

See the left inset drawing. Attach the Lock Plate

(14)to the Front Leg (10) with an M8 x 69mm Shoulder Bolt (87), an M8 Washer (103), and an M8 Nylon Locknut (78).

See the right inset drawing. Insert the Lock Plate Pin (95) through the Lock Plate (14) and the Leg Lever (12). Attach the tether on the Lock Plate Pin to the Front Leg (10) with an M4 x 12mm Self-tapping Screw (102).

12.Attach the Butterfly Frame (5) to the Top Frame

(4) with two M8 x 80mm Bolts (100), two M8 Washers (103), and two M8 Nylon Locknuts (78).

Do not tighten the Nylon Locknuts yet.

Attach the Butterfly Frame (5) to the Butterfly Frame Brace (6) with an M10 x 75mm Button Screw (118).

10
		78
100
		103
6	100
	2
11		Grease
	Hole	116
		Bracket
Grease
	69	116
	12
		10
	Rod
		103
	10	14
14		78
		102	12
		95
87		10
12
	100
		103
	103
	4
5
		6
		78
118

12