Gold's Gym GGSY3066.1 manual Repeat this step for the Left Press Arm not shown

16.Position a Press Arm Handle (17) with the 90° bend oriented as shown. Attach the Press Arm Handle to the Right Press Arm (16) with two M10 x 65mm Button Bolts (106), four M10 Washers (80), four 11mm Spacers (99), and two M10 Nylon Locknuts (77).

Repeat this step for the Left Press Arm (not shown).

17.Attach the Left Press Arm (15) to the Right Press Arm (16) with an M10 x 110mm Bolt (93), an 89.5mm Spacer (59) and an M10 Nylon Locknut (77).

Finish attaching the Press Arms (15, 16) with two M10 x 65mm Bolts (85), two M10 Washers (80), and two M10 Nylon Locknuts (77). Do not tight- en the Nylon Locknuts yet.

18.Apply grease in the locations shown and attach the Left and Right Press Arms (15, 16) to the Base (1) with an M10 x 110mm Bolt (93), an 89.5mm Spacer (59), and an M10 Nylon Locknut (77). Do not overtighten the Nylon Locknut; the Press Arms (15, 16) must be able to pivot freely.

Tighten the Nylon Locknuts used in step 17.

16	80	77
	99
99		80	90°
80		99	Bend
	99		17
106	80
90° Bend	16
17
16
77		15
	59
77	93
80			85
18
16	15
77
	59	1
		93
Grease

14