22.Wrap the Butterfly Cable (50) over a
23.Grease an M8 x 22mm Shoulder Bolt (90). Attach the Butterfly Cable (50) to the Right Butterfly Arm (29) with the Shoulder Bolt and an M8 Nylon Locknut (78). Make sure that the flat edge of the Cable is against the Butterfly Arm.
24.Identify the Lat Cable (49). Route the Cable up through the Top Frame (4) and over a 90mm Pulley (48). Attach the Pulley inside the Top Frame with an M10 x 80mm Bolt (84), two M10 Washers (80), two 19mm Spacers (67), and an M10 Nylon Locknut (77).
16
22 |
|
| |
| 54 |
| |
79 |
| 57 | |
|
| 50 | |
47 | 80 |
| |
|
| ||
| 54 | 2 | |
|
| ||
|
| 77 | |
23 |
|
| |
Grease | 90 | 50 | |
|
| ||
|
| 78 | |
29 |
|
| |
Flat Edge |
|
| |
24 |
|
| |
84 | 48 | 4 | |
80 | |||
67 | |||
|
| ||
67 | 80 | ||
| 49 | 77 | |
|
|