PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
M6 Nylon | M8 Nylon | M10 Nylon |
| M4 Washer |
|
M12 Nut (112) | (104) | M6 Washer | |||
Locknut (107) | Locknut (78) | Locknut (77) |
| (114) | |
|
|
M8 Washer (103)
M10 Washer (80) | M10 Large Washer (105) | M12 Large Washer (98) |
M4 x 12mm | M4 x 16mm | M6 x 20mm |
|
|
|
|
|
M8 x 22mm |
|
| |||||
Screw (88) | M10 x 20mm | ||||||
Screw (102) | Screw (110) |
| Shoulder Bolt (90) | Button Screw (96) | |||
|
|
|
|
|
|
|
|
M10 x 70mm Bolt (113) | M10 x 75mm Button Screw (118) |
7mm Spacer (111) | 11mm Spacer (99) | 13mm Spacer (109) |
19mm Spacer (67) | 21mm Steel Spacer (108) | 56.5mm Spacer (69) |
89.5mm Spacer (59)
5