Gold's Gym GGSY3066.1 manual

Page 18

28.Wrap the Lat Cable (49) around a 90mm Pulley (48) and route the Cable down through the Top Frame (4). Attach the Pulley inside the Top Frame with an M10 x 80mm Bolt (84), two M10 Washers (80), two 19mm Spacers (67), and an M10 Nylon Locknut (77).

29.Set an M12 Large Washer (98) on top of the Weight Tube (20). Thread the M12 Nut (112) all the way onto the Lat Cable (49).

Thread the Lat Cable (49) into the Weight Tube (20) two turns. Tighten the M12 Nut (112) against the M12 Large Washer (98).

30.Identify the Leg Lever Cable (51). Route the Cable through the Leg Lever (12) and the Front Leg (10).

Insert a 90mm Pulley (48) into the Leg Lever (12) from behind as shown. Attach the Pulley with an M10 x 65mm Bolt (85), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77).

28
	84	48
	80 67	48
		67
		80
	49	77
	4
29
	49
	112
	98
		20
30
	12
85	48
85	80
	80
51	109
51
	10
	109
	80 77

18

Image 18

Contents QUESTIONS? Model No. GGSY3066.1 Serial NoCall TOLL-FREE Table of Contents Important Precautions Before YOU Begin Right SideLeft Side Part Identification Chart 89.5mm SpacerPage Page Assembly Make Assembly EasierFour Stages of the Assembly Process Nylon Locknuts yet Do not tighten the Nylon Locknuts yetNylon Locknut yet Nylon Locknuts 78. Do not tighten the Nylon Locknuts yetWeight Tube is oriented as shown Repeat this step for the Right Shroud not shownRepeat this step for the Right Shroud Arm Assembly Repeat this step for the Left Butterfly Arm Repeat this step for the Left Press Arm not shown Tighten the Nylon Locknuts used in step BendCable Assembly Grease Flat Edge Page Page Lever Cable 51 is under the Pulley Page 113 Repeat this step for the Left Butterfly Pad Knob passes through one of the holes in the Backrest FramePage Page Adjustment Changing the Weight SettingAttaching the Accessories Seat 32 can be adjusted in the same manner Using the Curl PADAdjusting the Backrest Locking the Weight StackLocking the LEG Lever Weight Resistance ChartWeight High Butterfly Press ARM LEG Lever LOW Pulley LbsCable Diagram Butterfly CableLeg Lever Cable Maintenance Tightening the CablesExercise Guidelines Cooling Down Staying MotivatedPart LIST-Model No. GGSY3066.1 Qty Description7mm Spacer Grease Packet 112 M12 Nut Exploded Drawing A-Model No. GGSY3066.1 R0907A Exploded Drawing B-Model No. GGSY3066.1 R0907A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT