Healthrider HRCCEL59930 Maintenance and Troubleshooting, HOW to Move the Elliptical Exerciser

Page 22

MAINTENANCE AND TROUBLESHOOTING

Inspect and properly tighten all parts of the elliptical

HOW TO MOVE THE ELLIPTICAL EXERCISER

exerciser regularly. Replace any worn parts immedi-

 

ately.

 

Stand in front of the elliptical exerciser, hold the han-

 

 

dlebars firmly, and place one foot against the ramp in

For smooth

 

the location shown below. Pull the handlebars until

operation of the

 

the elliptical exerciser can be moved on the front

elliptical exer-

Ramp

wheels, and carefully move the elliptical exerciser to

ciser, inspect

the desired location. Then, place one foot against the

 

and clean the

 

ramp, and lower the elliptical exerciser. Due to the

ramp regularly

 

size and weight of the elliptical exerciser, use

using a soft

 

extreme caution while moving and lowering it.

cloth and mild

 

 

detergent.

 

 

Other parts of

 

 

the elliptical

 

 

exerciser can

 

 

also be cleaned in this way. Keep liquids off the

Handlebars

console. Never use abrasives or solvents.

 

PULSE SENSOR TROUBLESHOOTING

 

 

If the handgrip pulse sensor does not function proper-

Place your

ly, see step 6 on page 13.

 

foot here

HOW TO CALIBRATE THE INCLINE SYSTEM

 

If the elliptical exerciser’s incline system is not working

 

properly, activate the calibration process by following

Wheel

the steps below.

 

 

 

1. Hold down the + button and the Program button at the same time for about five seconds. Note: Numbers may appear in the left and right displays. Disregard these numbers.

HOW TO LEVEL THE ELLIPTICAL EXERCISER

2.

Press the Program button again. Note: A combina-

 

 

tion of letters and numbers may appear in the dis-

If the elliptical

 

plays.

exerciser rocks

 

 

during use, turn

3.

Press the 30° Ramp button. The ramp will move all

one or both of

 

of the way up and then all of the way down.

the leveling feet

 

 

under the rear

4.

Press the Program button three times. The con-

stabilizer until

 

sole will then be in the normal operating mode and

the rocking

 

the elliptical exerciser will be ready for use.

motion is elimi-

 

 

nated.

Leveling

Foot

22

Image 22
Contents QUESTIONS? Model No. HRCCEL59930 Serial NoTable of Contents Important Precautions Back Before YOU BeginFront Right SideAssembly Wrenches Rubber mallet PliersPage Attach the Right Pedal Leg not shown in the same way Page Be careful to avoid pinching the wires Installing the Receiver for the Optional Chest Pulse SensorThis product must be grounded HOW to USE the Elliptical ExerciserHOW to Plug in the Power Cord Exercising on the Elliptical ExerciserFeatures of the Console Console DiagramFor information about an optional chest pulse sen- sor, see HOW to USE the Manual Mode Same time, the console will not display Measure your heart rate if desiredWear the optional chest pulse sensor at Plastic onHOW to USE Resistance and Pace Programs Monitor your progress with the two displays HOW to USE Heart Rate ProgramsSelect one of the heart rate programs Rate program Setting. Important The target heart rate setSelected heart Hold the handgrip pulse sensorHOW to Connect Your Portable Stereo Audio CableHOW to Connect Your Home Stereo HOW to Connect Your Computer HOW to Connect Your VCR PressVCR. the play button on your CD player or Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteSee on Return to the elliptical exerciser and begin PedalingPulse Sensor Troubleshooting Maintenance and TroubleshootingHOW to Move the Elliptical Exerciser HOW to Calibrate the Incline SystemWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyR0904A Qty Description111 Exploded DRAWING-Model No. HRCCEL59930 Model No. HRCCEL59930 R0904A HOW to Order Replacement Parts Limited Warranty