JVC LVT0900-003A manual Recording onto a Tape, To record a single track of a CD/MD during play

Recording onto a Tape

You can use only type I tapes for recording.

1 Prepare the source to record.

To record a disc:

Prepare a disc.

After placing a disc, press CD 3/8, then 7 to change the source to “CD.”

•You can make a program (see page 24) or select Random play mode (see page 25) if you want.

To record an MD:

Prepare an MD.

After inserting an MD, press MD 3/8, then 7 to change the source to “MD.”

•You can make a program (see page 28) or select Random play mode (see page 29) or Group play mode (see page 30) if you want.

To record FM/AM (MW/LW) broadcasts:

Press FM/AM (or FM/AM/AUX on the remote control) to select either “FM” or “AM,” then tune in to a preset station you want.

• For more detailed operations, see pages 17 and 18.

To record external equipment:

Press AUX/DVD (or FM/AM/AUX on the remote control) to select “AUX” and prepare the external equipment to play.

•Adjust the audio input level if necessary (see page 35).

•For operation of the external equipment, see the manuals supplied with it.

2 Put a recordable cassette into the cassette holder.

3 Press REV.MODE to select a reverse mode.

•Each time you press the button, the reverse mode changes as follows:

Recording on	Recording on
one side.	both sides once.
		*

* will be shown during recording when you

select .

4 Press ONE TOUCH TAPE REC on the main unit.

The recording starts and the REC indicator starts flashing on the display.

•When you select a track by pressing ¢ or 4 before pressing ONE TOUCH TAPE REC, recording starts from the selected track (except when Program play mode is selected).

•When recording an external equipment, start playback after “AUX = TAPE” appears in the main display.

To stop recording, press 7.

To record a single track of a CD/MD during play

On the main unit ONLY:

While playing back a disc track or an MD track you want to record, press ONE TOUCH TAPE REC.

The playback of the track is stopped, and the same track starts playing from the beginning again. This time, the cassette deck starts recording the track.

•After the track is recorded, both playback and recording stop automatically.

When you press ONE TOUCH TAPE REC while pausing a track

Recording starts from that point.

To change the information shown in the main display

On the remote control ONLY:

Press DISP/CHARA.

•Each time you press the button, the information in the main display alternates between the recording indication and the clock indication.

When recording a disc or an MD

•A 4-second blank is automatically made on the tape before the first track. To record without the blank, press CD 3/8 or MD 3/8 twice in step 1, then press ONE TOUCH TAPE REC.

•When the front side of the tape ends in the middle of a track, the recording on the reverse side starts from the beginning of that

track (if the reverse mode is set to ).

However, if the front side ends within 12 seconds from the beginning of a track, recording on the reverse side starts from the previous track.

– 42 –