JVC LVT0900-003A manual Searching for Tracks to Play MD Title Search

Searching for Tracks to Play

—MD Title Search

You can search for the tracks by their titles and play them back.

For details on assigning a title, see pages 59 and 60.

On the remote control ONLY:

1 Load an MD.

2 Press MD 3/8, then 7.

The source is changed to “MD.”

3 Press TITLE SEARCH.

The TITLE SEARCH indicator lights up on the display. The play mode changes to Normal play.

“TITLE” and the character entry position appear in the main display.

TITLE SEARCH indicator

Character set Character entry position

4 Enter the character(s) to search for the track title.

You can enter up to 5 characters. The unit will search for the tracks which have the entered characters at the head of their titles.

•You can also search for the tracks without a title. In this case, go to step 5 without entering any character.

1)Press DISP/CHARA to select the character set you want.

•Each time you press the button, the character set changes as follows:

Capital letters &	Small letters &
Symbols	Symbols

Numerals

2)Press the character entry button for a character you want to enter.

Ex.:

•To enter an “A” or “a,” press ABC once. To enter a “B” or “b,” press ABC twice.

To enter a “C” or “c,” press ABC three times.

•To enter a symbol, press MARK repeatedly until the mark you want appears.

•To enter a numeral, press 0 – 9.

•To enter a space while entering a title, press twice.

•To move the character entry position while

entering a title, press or .

•If you have entered an incorrect character, press

orto select the character you want to correct, then press CANCEL to delete it.

3)Repeat steps 4 – 1) and 4 – 2) to enter other characters.

•If the character you want to enter next is assigned

to the same button you have just pressed in step

4 – 2), pressonce to move the character entry position to the right.

5 Press ENTER.

“SEARCH • • •” scrolls and the TITLE SEARCH indicator starts flashing on the display. The unit starts searching for the track.

•When the track with the desired title is found, the unit plays back the track. (After the track is played, the unit starts searching for the next matching track.)

•If no track with the desired title is found, “SEARCH END” appears in the main display and Normal play mode resumes (the TITLE SEARCH indicator goes off).

To skip the current playback and search for the next track, press ¢.

To cancel title searching, press TITLE SEARCH.

When you press the button during playback or search, Normal play resumes.

Available symbols are as follows:

(Blank)

– 31 –