JVC LVT0900-003A manual CD/MD Messages, Cannot REC x1 REC only, Cannot REC x1 or x2 only

CD/MD Messages

For CD:

Message

CANNOT PLAY

CD NO DISC

CANNOT REC x1 REC ONLY

For MD:

Signification

You are trying to play back a CD which cannot be played or there is a problem with the CD.

•No disc is on the disc tray.

•You are trying to play back a CD-R/RW which has not been “finalized.”

You are trying to record a CD onto an MD and a tape at the same time using x2 or x4 speed recording.

Solution

Change the CD.

•Place a disc on the disc tray.

•This is not a malfunction. You can play back “finalized” CD-R/RWs.

This is not a malfunction. Select normal recording speed (x1). (See page 43.)

Message

BLANK DISC

CANNOT ENTRY!

CANNOT FORM!

CANNOT GROUP!

CANNOT JOIN

CANNOT LISTEN

CANNOT TITLE

CANNOT REC x1 or x2 ONLY

READ ERROR

DISC FULL

DISC

PROTECTED

Signification

The disc is blank.

The track has already been in the selected group.

You are trying to form a new group including other groups.

There is no more space for storing information concerning MD group.

You are trying to join tracks (shorter than 8 seconds) or groups which cannot be joined.

You are trying to listen to the sound during high-speed recording.

You are trying to enter the title on the MD which already has over 1 792 characters in total.

You are trying to record a CD in program play or random play mode using x4 speed recording.

The UTOC fails to be read.

There is no more space on the MD or there are over 254 tracks.

MD is write-protected.

Solution

Change the MD if you want to enjoy playback.

This is not a malfunction.

(See “Adding a Track to a Group— ENTRY GR” on page 48.)

This is not a malfunction.

(See “Forming a Group—FORM GR” on page 47.)

You cannot form a group any more on the MD.

This is not a malfunction. (See pages 50, 56 and 68.)

This is not a malfunction.

You cannot listen to the sound during high-speed recording.

This is not a malfunction.

(See “Assigning Titles to an MD” on page 59.)

This is not a malfunction. Select other recording speeds. (See page 39.)

Turn off the unit, then turn on it again.

Use another recordable MD or erase some tracks.

Unprotect the MD or use another. (See page 37.)

– 69 –