JVC LVT0900-003A manual Joining Two Groups-JOIN GR, When Cannot Join appears in step

Joining Two Groups—JOIN GR

This function allows you to join two adjacent groups into a single group.

When the groups have their own titles, the title of the preceding group is reassigned to the joined group. Once two groups are joined, the other groups are renumbered.

•To stop any time during the editing process before step 6, press GROUP TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press GROUP TITLE/EDIT repeatedly until “JOIN GR ?” appears in the main display.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

•If the loaded MD has only one or no group, you cannot go to the following steps.

•During playback:

The group number of the currently playing track will appear on the right. If the track does not belong to any group, the group number will be indicated by “– –.”

4 Press GROUP SKIP or GROUP SKIP to select the two adjacent groups you want to join.

5 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

6 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

To divide the group again, see the DIVIDE GR function

on page 49.

When “CANNOT JOIN” appears in step 5

You are trying to join two groups which are separated by another track(s) in-between. In this case, you need to move either of the groups or the track(s).

Ex.: When groups 7 and 8 are selected.

– 50 –