JVC LVT0900-003A Dividing a Group-DIVIDE GR, To join the divided groups again, see the Join GR

Dividing a Group—DIVIDE GR

This function allows you to divide one group into two separate groups.

You cannot divide the group containing only a single track. When the original group has a title, two separate groups are reassigned the same title as the original group.

Once a group is divided, the other groups are renumbered.

•To stop any time during the editing process before step 7, press GROUP TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press GROUP TITLE/EDIT repeatedly until “DIVIDE GR?” appears in the main display.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

•If the loaded MD has no group, you cannot go to the following steps.

•During playback:

The currently playing track number and its group number will appear. If the track does not belong to any group, the group number will be indicated by “– –.”

4 Press GROUP SKIP or GROUP SKIP to select the group you want to divide.

5 Press ¢or 4to select the track as the dividing point.

The track selected in this step will be the first track in the divided group.

•You can select the track using the number buttons. In this case, the selected track starts playback repeatedly.

Ex.: When track 8 is selected.

•You cannot select the first track in a group or an ungrouped track as the dividing point.

6 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

7 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

To join the divided groups again, see the JOIN GR

function on page 50.

The first track of the selected group

Ex.: When group 2 is selected.

– 49 –