JVC LVT0900-003A manual Precautions on CD Playback, Playing Back the Entire CD-Normal Play

Page 28

Precautions on CD Playback

This unit has been designed to play back discs bearing the following logos:

Audio CD

CD Recordable (CD-R)

CD ReWritable (CD-RW)

In addition to the above discs, this unit can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already “finalized.” If you try to play back unfinalized discs, “CD NO DISC” may appear in the main display.

•You can play back your original CD-Rs or CD-RWs recorded in audio CD format ONLY. (If CD-RWs have been recorded in different format, erase all the data on CD-RWs completely before re-recording on the discs.)

DO NOT play back CD-Rs or CD-RWs recorded with sound files such as MP3.

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

Important notices:

•In general, you will have the best performance by keeping your discs and the mechanism clean.

–Store discs in their cases, and keep them in cabinets or on shelves.

–Keep the unit’s disc tray closed when not in use.

•Continuous use of irregular shaped discs (heart-shape, octagonal, etc.) can damage the disc rotating mechanism.

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than for regular CDs.

Playing Back the Entire CD—Normal Play

1 Press CD 0 on the main unit.

The unit automatically turns on, the electronic swing panel slides downward, then the disc tray comes out.

Disc tray

Electronic swing panel

2 Place a disc correctly on the circle of the disc tray with its label side up.

 

 

 

Good

No good

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CD 3/8.

The disc tray closes, then the electronic swing panel slides upward automatically.

The CD indicator starts flashing on the display and disc playback starts from the first track of the disc.

•If you press CD 0 instead of CD 3/8, the disc tray and electronic swing panel close, but disc playback does not start.

CD (disc) indicator

The current track No. Elapsed playing time

Disc playback stops after playing all the tracks of the disc.

To stop during play, press 7.

To remove the disc, press CD 0.

•After removing the disc, press CD 0 again to close the disc tray.

– 23 –

Page 27 Page 29
Image 28
Page 27 Page 29
Contents UX-Z7MDR-Consists of CA-UXZ7MDR and SP-UXZ7MD LVT0900-003AIf in Doubt Consult a Competent Electrician UX-Z7MDR Important for Laser Products Above ALL Precautions IntroductionContents Main Unit Location of the ButtonsMain unit Display window on the electronic swing panel Display windowRemote Control When using the remote controlConnecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers You can connect the speakers using the speaker cordsAM MW/LW antenna To connect an outdoor AM MW/LW antennaConnecting External Equipment To remove the speaker grillesTo connect external equipment Speaker grilles are removable as illustrated belowPutting the Batteries into the Remote Control R6PSUM-3/AA15FRemote control Basic and Common OperationsSetting the Auto Power Off Turning On the PowerTurning On/Off the Key-touch Tone To turn off the clock indication power save mode Setting the ClockTo check the clock time with tones To increase the volume, turn Volume + / control Clockwise FM AMIf Cannot Listen appears in the main display For private listeningBass OFF canceled Flat Jazz canceledTo check the sound mode currently selected, press Reinforcing the Bass SoundSetting the Display Illumination To select the illumination colorTo create your favorite colors To change the display brightnessListening to FM and AM MW/LW Broadcasts Tuning in to a Station Presetting StationsTo change the FM reception mode To change the information shown in the main displayTuning in to a Preset Station Receiving FM Stations with RDSChanging the RDS Information Searching for Programs by PTY Codes PTY SearchPS PTY RT Release your finger from RDS Control Press PTY SearchTA News Switching to a Program Type of Your Choice TemporarilyInfo Test function Alarm functionDescription of the PTY codes Playing Back CDs CD-R/CD-RW Precautions on CD Playback Playing Back the Entire CD-Normal PlayTo go to another track directly using the number buttons Basic CD OperationsProgram Play To stop playback for a momentTo check the program contents Playing at Random-Random PlayRepeating Tracks-Repeat Play To modify the programPlaying Back MDs Basic MD Operations To locate a particular point in a track during playAbout MD indicator While playing or pausingNormal play MD Group On the main unit only To prohibit disc ejectionOn the remote control only Load an MD Press MD 3/8, then To erase the entire program, press MD 0 to eject the MDTracks of the loaded MD will play at random Tracks are played at randomMD Repeat OFF canceled Playing Tracks in a Group-Group PlayPress Group Skip or Group Skip to select a group To go to another track in the same group, press ¢ orSearching for Tracks to Play MD Title Search Playing Back Tapes To play both sides-Reverse mode Playing Back a TapePush Push Open Put a cassette in with the exposed part of the tape downListening to External Equipment For how to apply sound effects, see Adjusting the Audio Input LevelListening to External Equipment Recording Before You Start Recording on an MD About the track marksTo avoid erasing important recordings To put a track mark manually while recording anPrecautions for performing long-hour stereo recording Stereo Long-Hour Recording MdlpAbout High-Speed Recording To check the remaining recording timeSetting MD Recording Modes To set the recording length modeTo set LP-prefix addition mode To set Group recording modeOn the remote control only Press DISP/CHARA Recording Other Sources onto an MDTo record a single track during play or pause To record a tapeTo clean the heads, capstans, and pinch rollers Before You Start Recording on a TapeTo protect your recordings To keep the best recording and playback sound qualityRecording onto a Tape To record a single track of a CD/MD during playPrepare the source to record To record a disc To record an MDPress REV.MODE to select the reverse mode When recording on an MD and a tape at the same timeFor the tape Press MD&TAPE RECEditing MDs Using MD Group functions How to make up GroupsGuidance-MD Group Functions Classifying the tracks on an MDIntroducing Group Editing Functions Forming a Group-FORM GR Press SET During playbackPress ¢or 4to select the first track of a new group Press ¢or 4to select the last track of the new groupWhen Cannot ENTRY! appears in step Adding a Track to a Group-ENTRY GRPress ¢or 4to select the track Or Group SkipTo join the divided groups again, see the Join GR Dividing a Group-DIVIDE GRFunction on Joining Two Groups-JOIN GR When Cannot Join appears in stepTo divide the group again, see the Divide GR function Moving a Group-MOVE GR Ungrouping Tracks-UNGROUP To cancel the setting, press CancelDissolving All Groups-UNGR ALL Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Press or to precisely adjust the dividing point Dividing a Track-DIVIDEPress ¢or 4to select the track you want to divide To join the divided tracks again, see the Join functionWhen the track belongs to a group Joining Two Tracks-JOINTo divide the joined tracks, see the Divide function on If Cannot Join appears in stepMoving a Track-MOVE Press ¢or 4to select the track you want to moveErasing All Tracks-ALL Erase Erasing Tracks-ERASEPress SET Press ¢or 4to select the track you want to erase Press or to change the title entry mode Assigning Titles to an MDFor the group title For the disc and track titleChanging the Title Using the Timers Using Recording Timer How Recording Timer actually worksSource indication Clock time canceled FM AM AUXUsing Daily Timer How Daily Timer actually worksTo turn off the Recording Timer after its setting is done To turn on the Recording Timer againVolume setting appears in the main display To turn off the Daily Timer after its setting is doneTo turn on the Daily Timer again FM AM CD AUX Tape MDTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance Utoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Symptoms Cause Scms Serial Copy Management SystemHcms High-speed Copy Management System MD limitationsCannot REC x1 REC only CD/MD MessagesCannot REC x1 or x2 only Message Troubleshooting SymptomSpecifications AUX/DVD0602MWMMDWJEM

LVT0900-003A specifications

The JVC LVT0900-003A is a remarkable car stereo designed to enhance the in-vehicle audio experience. Aimed at audiophiles and casual listeners alike, this model showcases JVC's commitment to delivering high-quality sound performance, robust build quality, and user-friendly features.

One of the standout attributes of the LVT0900-003A is its powerful amplification capabilities. With a built-in MOSFET amplifier, this stereo delivers clear and distortion-free sound, ensuring that even at higher volumes, the audio quality remains pristine. The unit is capable of supporting high-output speakers, making it a versatile choice for users who wish to upgrade their vehicle’s sound system.

The LVT0900-003A supports a wide range of media formats, including CDs, MP3s, and various digital audio files. This all-in-one capability allows users to enjoy their favorite music without the need for additional equipment. Additionally, the stereo features USB input and an auxiliary input, giving users the flexibility to connect smartphones, flash drives, and other external devices seamlessly.

In terms of connectivity, the LVT0900-003A is equipped with Bluetooth technology, enabling hands-free calling and wireless audio streaming. This feature not only enhances convenience for drivers but also promotes safety by allowing users to keep their hands on the wheel while taking calls or changing tracks.

Another notable characteristic of the JVC LVT0900-003A is its compatibility with various audio enhancement technologies. The stereo includes a built-in equalizer, allowing users to customize their sound preferences by adjusting the bass, midrange, and treble levels. This feature ensures a tailored listening experience that meets individual user needs.

The design of the LVT0900-003A is both sleek and practical, featuring a user-friendly interface with easy access to controls. The backlit display offers clear visibility in various lighting conditions, ensuring that drivers can effortlessly navigate through their audio options while on the road.

In conclusion, the JVC LVT0900-003A is a feature-rich car stereo that combines powerful audio performance with versatile connectivity options. Its blend of modern technology, user-friendly interface, and customizable sound settings make it an attractive option for anyone looking to enhance their in-car audio experience. With its robust build and quality engineering, the LVT0900-003A is sure to satisfy even the most discerning audio enthusiasts.
Top Page Image Contents