JVC LVT0900-003A manual Erasing Tracks in a Group-ERASE GR

Page 58

Erasing Tracks in a Group—ERASE GR

This function allows you to erase a group together with tracks in the group.

You cannot resume the tracks in the erased group. Once a group is erased, the other tracks and groups are renumbered.

•To stop any time during the editing process before step 6, press GROUP TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press GROUP TITLE/EDIT repeatedly until “ERASE GR ?” appears in the main display.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

•If the loaded MD has no group, you cannot go to the following steps.

•During playback:

The group number of the currently playing track will appear. If the track does not belong to any group, the group number will be indicated by “– –.”

4 Press GROUP SKIP or GROUP SKIP to select the group you want to erase.

Ex.: When group 6 is selected.

5 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

6 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

– 53 –

Page 57 Page 59
Image 58
Page 57 Page 59
Contents UX-Z7MDR-Consists of CA-UXZ7MDR and SP-UXZ7MD LVT0900-003AIf in Doubt Consult a Competent Electrician UX-Z7MDR Important for Laser Products Above ALL Precautions IntroductionContents Main Unit Location of the ButtonsMain unit Display window on the electronic swing panel Display windowRemote Control When using the remote controlUnpacking Connecting AntennasGetting Started FM antennaAM MW/LW antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM MW/LW antennaTo connect external equipment Connecting External EquipmentTo remove the speaker grilles Speaker grilles are removable as illustrated belowPutting the Batteries into the Remote Control R6PSUM-3/AA15FRemote control Basic and Common OperationsSetting the Auto Power Off Turning On the PowerTurning On/Off the Key-touch Tone To turn off the clock indication power save mode Setting the ClockTo check the clock time with tones If Cannot Listen appears in the main display To increase the volume, turn Volume + / control ClockwiseFM AM For private listeningTo check the sound mode currently selected, press Bass OFF canceledFlat Jazz canceled Reinforcing the Bass SoundTo create your favorite colors Setting the Display IlluminationTo select the illumination color To change the display brightnessListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in to a StationPresetting Stations To change the information shown in the main displayTuning in to a Preset Station Receiving FM Stations with RDSPS PTY RT Changing the RDS InformationSearching for Programs by PTY Codes PTY Search Release your finger from RDS Control Press PTY SearchTA News Switching to a Program Type of Your Choice TemporarilyInfo Test function Alarm functionDescription of the PTY codes Playing Back CDs CD-R/CD-RW Precautions on CD Playback Playing Back the Entire CD-Normal PlayProgram Play To go to another track directly using the number buttonsBasic CD Operations To stop playback for a momentRepeating Tracks-Repeat Play To check the program contentsPlaying at Random-Random Play To modify the programPlaying Back MDs Basic MD Operations To locate a particular point in a track during playNormal play MD Group About MD indicatorWhile playing or pausing On the main unit only To prohibit disc ejectionTracks of the loaded MD will play at random On the remote control only Load an MD Press MD 3/8, thenTo erase the entire program, press MD 0 to eject the MD Tracks are played at randomPress Group Skip or Group Skip to select a group MD Repeat OFF canceledPlaying Tracks in a Group-Group Play To go to another track in the same group, press ¢ orSearching for Tracks to Play MD Title Search Playing Back Tapes Push Push Open To play both sides-Reverse modePlaying Back a Tape Put a cassette in with the exposed part of the tape downListening to External Equipment For how to apply sound effects, see Adjusting the Audio Input LevelListening to External Equipment Recording To avoid erasing important recordings Before You Start Recording on an MDAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeTo set LP-prefix addition mode Setting MD Recording ModesTo set the recording length mode To set Group recording modeTo record a single track during play or pause On the remote control only Press DISP/CHARARecording Other Sources onto an MD To record a tapeTo protect your recordings To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To keep the best recording and playback sound qualityPrepare the source to record To record a disc Recording onto a TapeTo record a single track of a CD/MD during play To record an MDFor the tape Press REV.MODE to select the reverse modeWhen recording on an MD and a tape at the same time Press MD&TAPE RECEditing MDs Guidance-MD Group Functions Using MD Group functionsHow to make up Groups Classifying the tracks on an MDIntroducing Group Editing Functions Press ¢or 4to select the first track of a new group Forming a Group-FORM GRPress SET During playback Press ¢or 4to select the last track of the new groupPress ¢or 4to select the track When Cannot ENTRY! appears in stepAdding a Track to a Group-ENTRY GR Or Group SkipTo join the divided groups again, see the Join GR Dividing a Group-DIVIDE GRFunction on Joining Two Groups-JOIN GR When Cannot Join appears in stepTo divide the group again, see the Divide GR function Moving a Group-MOVE GR Ungrouping Tracks-UNGROUP To cancel the setting, press CancelDissolving All Groups-UNGR ALL Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Press ¢or 4to select the track you want to divide Press or to precisely adjust the dividing pointDividing a Track-DIVIDE To join the divided tracks again, see the Join functionTo divide the joined tracks, see the Divide function on When the track belongs to a groupJoining Two Tracks-JOIN If Cannot Join appears in stepMoving a Track-MOVE Press ¢or 4to select the track you want to moveErasing All Tracks-ALL Erase Erasing Tracks-ERASEPress SET Press ¢or 4to select the track you want to erase For the group title Press or to change the title entry modeAssigning Titles to an MD For the disc and track titleChanging the Title Using the Timers Source indication Clock time canceled Using Recording TimerHow Recording Timer actually works FM AM AUXTo turn off the Recording Timer after its setting is done Using Daily TimerHow Daily Timer actually works To turn on the Recording Timer againTo turn on the Daily Timer again Volume setting appears in the main displayTo turn off the Daily Timer after its setting is done FM AM CD AUX Tape MDTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance MD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Hcms High-speed Copy Management System Symptoms CauseScms Serial Copy Management System MD limitationsCannot REC x1 REC only CD/MD MessagesCannot REC x1 or x2 only Message Troubleshooting SymptomSpecifications AUX/DVD0602MWMMDWJEM

LVT0900-003A specifications

The JVC LVT0900-003A is a remarkable car stereo designed to enhance the in-vehicle audio experience. Aimed at audiophiles and casual listeners alike, this model showcases JVC's commitment to delivering high-quality sound performance, robust build quality, and user-friendly features.

One of the standout attributes of the LVT0900-003A is its powerful amplification capabilities. With a built-in MOSFET amplifier, this stereo delivers clear and distortion-free sound, ensuring that even at higher volumes, the audio quality remains pristine. The unit is capable of supporting high-output speakers, making it a versatile choice for users who wish to upgrade their vehicle’s sound system.

The LVT0900-003A supports a wide range of media formats, including CDs, MP3s, and various digital audio files. This all-in-one capability allows users to enjoy their favorite music without the need for additional equipment. Additionally, the stereo features USB input and an auxiliary input, giving users the flexibility to connect smartphones, flash drives, and other external devices seamlessly.

In terms of connectivity, the LVT0900-003A is equipped with Bluetooth technology, enabling hands-free calling and wireless audio streaming. This feature not only enhances convenience for drivers but also promotes safety by allowing users to keep their hands on the wheel while taking calls or changing tracks.

Another notable characteristic of the JVC LVT0900-003A is its compatibility with various audio enhancement technologies. The stereo includes a built-in equalizer, allowing users to customize their sound preferences by adjusting the bass, midrange, and treble levels. This feature ensures a tailored listening experience that meets individual user needs.

The design of the LVT0900-003A is both sleek and practical, featuring a user-friendly interface with easy access to controls. The backlit display offers clear visibility in various lighting conditions, ensuring that drivers can effortlessly navigate through their audio options while on the road.

In conclusion, the JVC LVT0900-003A is a feature-rich car stereo that combines powerful audio performance with versatile connectivity options. Its blend of modern technology, user-friendly interface, and customizable sound settings make it an attractive option for anyone looking to enhance their in-car audio experience. With its robust build and quality engineering, the LVT0900-003A is sure to satisfy even the most discerning audio enthusiasts.
Top Page Image Contents