Ironman Fitness Alpine owner manual Congratulations

Page 9

Assembly

Figure 7

Step 1:

Locate console (F), and connect sensor wires (B5 and B6) to the wires coming from the console.

Step 2:

Note: Screws (F2) will already be attached on the backside of the console. Remove before sliding onto console tube.

Gently push all of the wires into the console tube. Slide console onto the console tube. Secure using two screws (F2). Place water bottle into the water bottle holder.

Figure 7

CONGRATULATIONS!

You have completed assembly of your Alpine Stepper.

Image 9

Contents Alpine Stepper Table of Contents Safety Precautions and Tips Important Safety InformationPulse Grip Parts Identifier Instructions for Assembly Step AssemblyTighten hardware using appropriate tools Attach the slide cover G8 to the unit as shown in the image Congratulations Console Buttons Console InstructionsConsole Functions Getting Started General InformationProgram Instructions Manual ProgramPrograms Watt ProgramUser Program Heart Rate Program HRCSee Monitoring Your Heart Rate section for more information Changing Between Metric Kilometers Standard MilesMonitoring Your Heart Rate Monitoring Your Heart RateExercise Guidelines Warm Up ExercisesWrist Extensor Calf Stretch Moving Instructions Alpine Part List REV.B Parts ListExploded View Residential and Personal Use Limited Warranty Warranty Information