Ironman Fitness Alpine owner manual Attach the slide cover G8 to the unit as shown in the image

Page 8

Assembly

Figure 5

Step 1:

Locate the right small handlebar (H2). Connect the pulse wire coming from the handlebar to the pulse wire coming from the console tube (B). Secure the handlebar to the console tube (B) using three bolts (G2).

Repeat for the left side.

Figure 5

Use tool

Figure 6

Step 1:

Attach the slide cover (G8) to the unit as shown in the image.

Step 2:

Slide the cover (G7) onto the handlebar assembly and secure using two bolts (G2).

Figure 6

Image 8

Contents Alpine Stepper Table of Contents Important Safety Information Safety Precautions and TipsPulse Grip Instructions for Assembly Parts IdentifierAssembly StepTighten hardware using appropriate tools Attach the slide cover G8 to the unit as shown in the image Congratulations Console Instructions Console ButtonsConsole Functions General Information Getting StartedProgram Instructions Manual ProgramWatt Program ProgramsUser Program Heart Rate Program HRCChanging Between Metric Kilometers Standard Miles See Monitoring Your Heart Rate section for more informationMonitoring Your Heart Rate Monitoring Your Heart RateWarm Up Exercises Exercise GuidelinesWrist Extensor Calf Stretch Moving Instructions Parts List Alpine Part List REV.BExploded View Warranty Information Residential and Personal Use Limited Warranty