Assembly
Getting Started - The Ironman Fitness Alpine Stepper will require some assembly. Unpack the box in a clear area. Remove packing material. Do not dispose of packing material until assembly is complete and unit is working properly. Place the unit on a clean level surface for assembly. Make sure there is easy access to an electrical outlet. Before assembling, the unit should be placed as close as possible to its final location. If you are missing any parts, please call Ironman Fitness at
Use tool | Figure 1 |
Use tool | Figure 2 |
|
Figure 1
Step 1:
Attach the rear stabilizer (C) to main frame
(A)and secure using four washers (G3) and four bolts (G4).
Slide console tube cover (A65) over console tube.
Note: If the machine is not stable, adjust the knob located on the end caps of the rear stabi- lizer (C). Turning the knob towards the + sym- bol will cause that side of the stabilizer to rise up.
6
Figure 2
Do not tighten hardware until Figure 4 is completed.
Step 1:
Attach console tube (B) to main frame (A). Connect upper console wire (B5) to lower console wire (A20). Secure using five wash- ers (G3) and five bolts (G4).