Assembly
Figure 3
Step 1:
Attach the right handlebar support (E2) to the main frame (A) using one bolt (G6).
Step 2:
Secure the right handlebar tube (D2) to the handlebar support tube (E2) using one screw (Z1).
Do not tighten hardware until Figure 4 is completed.
Figure 3 |
Z1 |
Figure 4
Step 1:
Secure the right handlebar (D2) to the console tube (B) using one bolt (G5). Attach the end cap (G9) to the unit.
Repeat Figures 3 and 4 using the left handlebar and left handlebar support tubes.
Tighten hardware using appropriate tools.
Figure 4 |
7 |