Spalding 211014 manual Position springs P-12 against elevator tubes as shown

P-12

H-22

5. Insert spacer (H-22) through springs (P-12) then assemble lower elevator tubes (P-19), and springs (P-12), to brackets (P-21) using

P-19bolts (H-18), plastic spacers (H-20), metal spacer (H-22) and nuts (H-15) as shown.

NOTE:

The spacer (H-22) will sit above the board brackets (P-21).

WARNING!

TIGHTEN BOLT (H-18) IN LOCK NUT (H-15) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE.

P-12

H-22

H-15

H-20

H-20

P-21

H-18

6. Insert T-bolt (H-31) into Slam Jam bracket (P-30) then, attach that assembly to board using bolts (H-29) and nuts (H-11).

IMPORTANT!

Position springs (P-12) against elevator tubes as shown

H-31

P-30

H-11

H-29

P/N 211014 03/05 22