9. Install handle assembly (P-10 and P-11) to lower elevator tubes (P-19) using bolt (H-18), spacers (H-14), and nut (H-15) as shown.
P-11
P-1
WARNING!
TIGHTEN BOLT (H-18) IN LOCK NUT (H-15) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE.
H-18 | P-19 |
|
| IMPORTANT! |
| Note orientation of handle. |
10. Secure the handle assembly (P-10 & P-11) to pole bracket (P-9) using bolt (H-30) and nut (H-23) as shown.
P-10
P-7
H-23
NOTE:
Before going on to next step, set adjustable system assembly to the 10’ (3.05 m) setting.
WARNING!
TIGHTEN BOLT (H-30) IN LOCK NUT (H-23) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE.