Spalding 211014 manual Section D Install Front Cover & Handle

SECTION D: INSTALL FRONT COVER & HANDLE

1. Upright system and fill base (P-8) with water (approximately 40 gallons) and snap fill cap (P-24) in place.

WARNING!

DO NOT LEAVE

ASSEMBLY UNATTENDED

WHEN EMPTY; IT MAY TIP

OVER.

P-8

P-24

						WARNING!
						TWO PEOPLE REQUIRED
						FOR THIS PROCEDURE.
						FAILURE TO FOLLOW THIS
						WARNING COULD RESULT
						IN SERIOUS INJURY AND/OR
						PROPERTY DAMAGE.
							CAUTION!
						ADD TWO GALLONS (7.6
						LITERS) OF NON-TOXIC
						ANTIFREEZE IN SUB-
						FREEZING CLIMATES.
							NOTE:
	SAND			.	)		IF USING SAND:
			lb				2 GALLONS OF
					kg)
		(163					ANTI-FREEZE IS
(360
							NOT REQUIRED

Attach front cover (P-22) to hinge tubes (P-16) using carriage bolts (H-27) and flange nuts (H-11) as

2. shown.

P-22

H-11	P-16
H-27

29 03/05 P/N 211014