Nike HRM/SDM manual Manually Calibrate the SDM Pod

If you ran 800 meters, adjust displayed distance to read 800m.

Manually Calibrate the SDM Pod

After calibration, the SDM pod automatically calculates an offset value. The default value is 1000.

Change the offset value to make small adjustments to the calibration. If the SDM pod is slightly under measuring a known distance, increase the offset value. Different shoe models may affect the pod calibration. Adjust the offset value accordingly if you notice differences between shoes.

Follow steps through to fine-tune the offset value.

4 Press to change value.

5 EXIT

	EXAMPLES
	1000	=	factory setting
2 3 SEC	990	=	99% of factory setting
	1010	=	101% of factory setting

7

8EXIT

3	Press several
Scroll to	times to scroll
WKOUT or	to OFFSET.
CHRON mode.

The offset value is 1000. You run 400m. The SDM pod returns a reading of 380m (5% under) The offset value should be adjusted to 1050 (5% above).

NOTE: Write down and save your offset value. It will come in handy if you let friends or family borrow the Triax Elite system and they change the calibration setting.

17