Link the Watch to the Computer

Use PC mode to connect the Triax Elite watch to the computer through the USB dock. The watch communicates with the USB dock as long as they are within 6 feet of each other. Follow steps through to link the watch to the computer.

The USB dock MUST be connected to the computer before opening the Triax Elite application. If you have opened the application before installing the USB dock, shut down the application and see page 6, Installing Application, USB Dock and Drivers, to ensure the USB dock is properly attached to the computer.

Open the Triax Elite application. You will be asked to provide USER PROFILE information the first time you open the application. Once you have created a USER PROFILE,

be sure to select the correct profile before linking the watch to the computer.

Successful Link

3	Scroll to PC mode.
	Watch will begin

linking

NOTE: The link has failed if the display reads PC NOT FOUND. Press START to retry.

NOTE: The WKOUT ACTIVE or CHRONO ACTIVE display means you must save a workout or run data before linking to the computer. See page 15, Begin a Workout, or page 19, Save Run Data.

Once you have established a successful link with your computer, click the SYNC button at the bottom of the Calendar window in the application.

The TRANSFER DATA window will open. Run and workout data is downloaded to the application. Scheduled workouts are uploaded to the watch.