
1
| G |
F | H |
STEP 1:
ATTACH MOBILE WHEEL/SLEEVE. Note: Make sure not to tighten bolts until all assembly steps have been completely assembled and aligned.
2 |
B |
E |
D |
J |
STEP 2:
ATTACH REAR FOOT SUPPORT TUBE.
3 |
STEP 3:
ATTACH SEAT AND SEAT POST. Note: Slide seat post into position and lock with the pop pin.
Note: Bolts, nuts and washers are
4 | L |
| R |
STEP 4:
ATTACH LEFT & RIGHT PEDALS. Note: Both pedals are labeled L for left and R for right. To tighten turn the left pedal COUNTER CLOCKWISE and the right pedal
CLOCKWISE.
5 |
A |
E |
STEP 5:
ATTACH HANDLEBAR.
6 |
E |
C |
STEP 6:
ATTACH CONSOLE MAST. Note: Make sure to loosen the water bottle screws in order to fit the console cable through the mast. DO NOT PINCH WIRES!
7 |
STEP 7:
ATTACH TENSION KNOB. (B51 model only) Note: Bolt is
The resistance indicator is located on the front of the tension knob.
8 | B52HR |
B51 |
STEP 8:
ATTACH CONSOLE AND CONNECT ALL WIRES. Note: DO NOT PINCH WIRES!
Bolts are
9