ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly | requires | the included tools and your own adjustable wrench | and Phillips |
screwdriver | _] | ........... . |
|
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a part is not in the parts bag, check to see if it has been preattached. If a part is missing, call
M8 Nylon | M8 Split | M10 Split | M4 x 15mm | M4 x 15mm |
Locknut | Washer | Washer | Screw | Screw |
M10 x 20mm Button | M10 x 73mm Button Screw |
Screw |
|
Identify the Front Stabilizer (2), which is narrower than the Rear Stabilizer (not shown). While another person
lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 73mm Button
Screws (33) and two M10 Split Washers (34).
34
34
33