WhileanotherpersonliftstherearoftheFrame(1), attachtheRearStabilizer(14)to theFramewithtwo MlOx 73mmButtonScrews(33)andtwoMlOSplit
Washers(34).
3.While another person holds the Upright (3) near the Frame (1), connect the Upper Wire Harness (32) to the Lower Wire Harness (31).
Gently pull the upper end of the Upper Wire Harness
(32)to remove the slack, and slide the Upright (3) onto the Frame (1). Be careful to avoid pinching the Wire Harnesses, Attach the Upright with three MlO x 2Omm Button Screws (35) and three MlO Split Washers (34).
4.Attach the Water Bottle Holder (29) to the Upright (3) with two M4 x 15mm Screws (15).
/
14
Be careful to avoid pinching the Wire
Harnesses (31, 32)
3435
29
15