Seat F
Seat post | G |
clamp |
|
Seat F
Seat post G clamp
Seat post E
End cap K
4. Attach seat to seat post clamp. | 5. Loosen the 6mm bolt and place seat rails |
| within the clamp. Adjust to desired seat |
| placement using 6mm Allen wrench. |
Level the Indoor Cycle
6.Secure the plastic end cap to the seat post using two end cap screws with the Phillips screwdriver side of the 6mm Allen wrench.
Move the indoor cycle to where it will be used and level it by rotating the adjustable feet underneath the stabilizers. Leveling the indoor cycle helps ensure a stable and quiet ride and reduces wear on the frame. When adjusted properly, there is no rocking movement from one foot to the other.
Leveler Feet | Rear stabilizer |
|
Front stabilizer
A B
Lock Nut
Rear stabilizer | A |
Front stabilizer | B |
1.If necessary, the four outer leveler feet can be adjusted. Turn stabilizer feet clockwise to lower the indoor cycle. Turn stabilizer feet counterclockwise to raise indoor cycle.
2.Secure the leveler feet by tightening the lock nuts, with the
5