Precor EFX 821 manual Attaching the side bolts

Page 21

Assembling the EFX

19

3.Fasten the display console mount to each upright support by threading a buttonhead screw, washer, and split washer through opposite mounting holes. Check that the base fasteners are loose before installing the display console fasteners.

CAUTION: Make sure the display console mount screws are properly threaded into the inserts. Do not cross thread. The Precor Limited Warranty does not cover damage that occurs during installation.

Figure 6: Attaching the side bolts

4.Check alignments and thread the remaining four display console mount screws, four washers, and four split washers. Wrench tighten with a ³⁄₁₆-inch hex key so the assemblies come together, but leave room for adjustments.

5.When all fasteners are snug against the unit, begin at the base and alternately wrench tighten all fasteners. Follow the sequence from step 2 through step 5.

Image 21

Contents Page Page Page Edition Information Trademark NoteIntellectual Property Notice Safety Precautions Important Safety InstructionsPage  Do not lean on or pull on the console at any time Educating Users Hazardous Materials and Proper DisposalProduct Recycling and Disposal Regulatory Notices for Cardiovascular Exercise Equipment 240 V Equipment Designated for U.S. Markets Industry CanadaEuropean Applications Obtaining Updated Documentation Obtaining ServicePage Table of Contents Page Assembling the EFX Installation Requirements  Set up the unit on a solid, flat surface Insert all fasteners with your fingers Hardware Kit not to scale Required ToolsFasteners Assembling the EFX To begin assemblyImportant Place excess cable inside the upright support Installing the Display Console MountAttaching the side bolts To install the bottle holder Installing the Bottle HolderTo install the moving handlebars Installing the HandlebarsAttaching the movable arms To attach the caps and upright support covers Attaching the Caps and Upright Support CoverTo level the unit Making Sure the Unit is StableBreaking in the Equipment Verifying that the Heart Rate Display is OperationalTo verify that the heart rate display is operational Page Installing the Console To thread the cable assembly Threading the Cable AssemblyConnecting Cables To complete the installation Completing the Console InstallationMinimum requirements for operation Equipment Rate of Motion Self-Powered FeaturesInformational Displays Prior to Shutdown Symptoms of a Low BatteryOptional Power Adapter Kit Using the Optional Power AdapterReplacing the Battery Daily Cleaning MaintenanceDaily Inspection Weekly MaintenanceMonthly Maintenance Storing the Chest Strap Moving the EquipmentLong-Term Storage Commercial Cardiovascular Equipment Limited Warranty Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental DamagesPage Page Page Precor Incorporated