Precor EFX 821 manual  Do not lean on or pull on the console at any time

Page 7

Important Safety Instructions

5

Maintain the equipment to keep it in good working condition, as described in the Maintenance section of the assembly and maintenance guide. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use.

If you plan to move the equipment, obtain help and use proper lifting techniques. Refer to the "Moving the Equipment" section of the assembly and maintenance guide.

Use the equipment only for its intended purpose as described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries.

Do not operate the equipment where aerosol (spray) products are being used or where oxygen is being administered.

Do not use outdoors.

Do not attempt to service the equipment yourself, except to follow the maintenance instructions in this manual.

Never drop or insert objects into any opening. Keep hands away from moving parts.

Do not set anything on the stationary handrails, handlebars, control console, or covers. Place liquids, magazines, and books in the appropriate receptacles.

Do not lean on or pull on the console at any time.

CAUTION: DO NOT remove the cover, or you may risk injury due to electric shock. Read the assembly and maintenance guide before operating. There are no user-serviceable parts inside. Contact Customer Support if the equipment needs servicing. For use with single phase AC supply only.

Image 7
Contents Page Page Page Trademark Note Edition InformationIntellectual Property Notice Safety Precautions Important Safety InstructionsPage  Do not lean on or pull on the console at any time Hazardous Materials and Proper Disposal Educating UsersProduct Recycling and Disposal Regulatory Notices for Cardiovascular Exercise Equipment Industry Canada 240 V Equipment Designated for U.S. MarketsEuropean Applications Obtaining Updated Documentation Obtaining ServicePage Table of Contents Page Assembling the EFX  Set up the unit on a solid, flat surface Installation Requirements Insert all fasteners with your fingers Hardware Kit not to scale Required ToolsFasteners Assembling the EFX To begin assemblyImportant Place excess cable inside the upright support Installing the Display Console MountAttaching the side bolts To install the bottle holder Installing the Bottle HolderTo install the moving handlebars Installing the HandlebarsAttaching the movable arms To attach the caps and upright support covers Attaching the Caps and Upright Support CoverTo level the unit Making Sure the Unit is StableVerifying that the Heart Rate Display is Operational Breaking in the EquipmentTo verify that the heart rate display is operational Page Installing the Console To thread the cable assembly Threading the Cable AssemblyConnecting Cables To complete the installation Completing the Console InstallationMinimum requirements for operation Equipment Rate of Motion Self-Powered FeaturesInformational Displays Prior to Shutdown Symptoms of a Low BatteryOptional Power Adapter Kit Using the Optional Power AdapterReplacing the Battery Daily Cleaning MaintenanceDaily Inspection Weekly MaintenanceMonthly Maintenance Moving the Equipment Storing the Chest StrapLong-Term Storage Limited Warranty Commercial Cardiovascular Equipment Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental DamagesPage Page Page Precor Incorporated