Precor EFX 821 Self-Powered Features, Minimum requirements for operation Equipment Rate of Motion

Page 33

Chapter 4

Self-Powered Features

On self-powered equipment, the system initializes and displays the Welcome screen when a user starts exercising. A minimum rate of motion must be maintained for the banner to appear, as shown in the following table. When a person meets the requirements, the power that is generated allows the equipment to function properly.

Table 3. Minimum requirements for operation

Equipment	Rate of Motion

AMT	56 strides per minute (SPM)

EFX	40 strides per minute (SPM)

Climber	30 steps per minute

Bike	20 revolutions per minute (RPM)

Informational displays appear when the battery is low or when the rate of motion drops below the minimum requirements. The display explains what to do to retain power. If the messages are ignored, the equipment begins shutdown procedures to maintain the charge of the battery. Refer to Informational Displays Prior to Shutdown.

An optional power adapter can be purchased and provides sustained power to the equipment. If you plan to change the club settings, the power adapter is highly recommended. To purchase the optional power adapter, check with your dealer. Refer to Obtaining Service.

Image 33

Contents Page Page Page Edition Information Trademark NoteIntellectual Property Notice Safety Precautions Important Safety InstructionsPage  Do not lean on or pull on the console at any time Educating Users Hazardous Materials and Proper DisposalProduct Recycling and Disposal Regulatory Notices for Cardiovascular Exercise Equipment 240 V Equipment Designated for U.S. Markets Industry CanadaEuropean Applications Obtaining Updated Documentation Obtaining ServicePage Table of Contents Page Assembling the EFX Installation Requirements  Set up the unit on a solid, flat surface Insert all fasteners with your fingers Hardware Kit not to scale Required ToolsFasteners Assembling the EFX To begin assemblyImportant Place excess cable inside the upright support Installing the Display Console MountAttaching the side bolts To install the bottle holder Installing the Bottle HolderTo install the moving handlebars Installing the HandlebarsAttaching the movable arms To attach the caps and upright support covers Attaching the Caps and Upright Support CoverTo level the unit Making Sure the Unit is StableBreaking in the Equipment Verifying that the Heart Rate Display is OperationalTo verify that the heart rate display is operational Page Installing the Console To thread the cable assembly Threading the Cable AssemblyConnecting Cables To complete the installation Completing the Console InstallationMinimum requirements for operation Equipment Rate of Motion Self-Powered FeaturesInformational Displays Prior to Shutdown Symptoms of a Low BatteryOptional Power Adapter Kit Using the Optional Power AdapterReplacing the Battery Daily Cleaning MaintenanceDaily Inspection Weekly MaintenanceMonthly Maintenance Storing the Chest Strap Moving the EquipmentLong-Term Storage Commercial Cardiovascular Equipment Limited Warranty Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental DamagesPage Page Page Precor Incorporated