Precor EFX 821 manual Maintenance, Daily Cleaning

Page 37

Chapter 5

Maintenance

To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty.

DANGER To reduce the risk of electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks. If the equipment is self-powered but also uses the optional power adapter, disconnect the adapter.

Daily Cleaning

Precor recommends that you clean the equipment before and after each exercise session. To remove dust and dirt from the equipment, wipe all exposed surfaces with a soft cloth that you have moistened with one of the following cleaners:

A solution of 30 parts of water to 1 part of Simple Green® (for more information, visit www.simplegreen.com)

ENVIR-O-SAFE oxygen enhanced cleaner or multi-task cleaner concentrate, diluted according to the manufacturer’s instructions (for more information, visit www.daleyinternational.com)

Alternatively, you can clean the equipment with Athletix fitness equipment cleaning wipes (for more information, visit www.athletixproducts.com)

Image 37

Contents Page Page Page Trademark Note Edition InformationIntellectual Property Notice Safety Precautions Important Safety InstructionsPage  Do not lean on or pull on the console at any time Hazardous Materials and Proper Disposal Educating UsersProduct Recycling and Disposal Regulatory Notices for Cardiovascular Exercise Equipment Industry Canada 240 V Equipment Designated for U.S. MarketsEuropean Applications Obtaining Updated Documentation Obtaining ServicePage Table of Contents Page Assembling the EFX  Set up the unit on a solid, flat surface Installation Requirements Insert all fasteners with your fingers Hardware Kit not to scale Required ToolsFasteners Assembling the EFX To begin assemblyImportant Place excess cable inside the upright support Installing the Display Console MountAttaching the side bolts To install the bottle holder Installing the Bottle HolderTo install the moving handlebars Installing the HandlebarsAttaching the movable arms To attach the caps and upright support covers Attaching the Caps and Upright Support CoverTo level the unit Making Sure the Unit is StableVerifying that the Heart Rate Display is Operational Breaking in the EquipmentTo verify that the heart rate display is operational Page Installing the Console To thread the cable assembly Threading the Cable AssemblyConnecting Cables To complete the installation Completing the Console InstallationMinimum requirements for operation Equipment Rate of Motion Self-Powered FeaturesInformational Displays Prior to Shutdown Symptoms of a Low BatteryOptional Power Adapter Kit Using the Optional Power AdapterReplacing the Battery Daily Cleaning MaintenanceDaily Inspection Weekly MaintenanceMonthly Maintenance Moving the Equipment Storing the Chest StrapLong-Term Storage Limited Warranty Commercial Cardiovascular Equipment Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental DamagesPage Page Page Precor Incorporated