Precor EFX 821 manual Making Sure the Unit is Stable, To level the unit

Page 26

24	Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer

4.Slide the covers down into the base mount. Secure each pair of covers using two self-tapping screws and a Phillips-head screwdriver.

Figure 13: Attaching the pivot axle covers

5.Insert the two pivot axle covers and press firmly into place.

Making Sure the Unit is Stable

Make sure the unit is level before allowing anyone to use it.

CAUTION: To eliminate movement, make sure the adjustable feet are in contact with the floor.

To level the unit:

1.Gently rock the unit. If there is any movement, ask your assistant to tip the unit to one side while you locate the adjustable feet.

2.Correct the height of each adjustable foot as follows.

If you want to …	Then turn the adjustable feet …
Raise the unit	Counterclockwise
Lower the unit	Clockwise

Important: Place the unit on a flat surface. Rotating the adjustable feet cannot compensate for extremely uneven surfaces.

When you are finished adjusting the unit, place the unit on the floor and recheck that it is level.

Image 26

Contents Page Page Page Intellectual Property Notice Edition InformationTrademark Note Important Safety Instructions Safety PrecautionsPage  Do not lean on or pull on the console at any time Product Recycling and Disposal Educating UsersHazardous Materials and Proper Disposal Regulatory Notices for Cardiovascular Exercise Equipment European Applications 240 V Equipment Designated for U.S. MarketsIndustry Canada Obtaining Service Obtaining Updated DocumentationPage Table of Contents Page Assembling the EFX  Insert all fasteners with your fingers Installation Requirements Set up the unit on a solid, flat surface Required Tools Hardware Kit not to scaleFasteners To begin assembly Assembling the EFXInstalling the Display Console Mount Important Place excess cable inside the upright supportAttaching the side bolts Installing the Bottle Holder To install the bottle holderInstalling the Handlebars To install the moving handlebarsAttaching the movable arms Attaching the Caps and Upright Support Cover To attach the caps and upright support coversMaking Sure the Unit is Stable To level the unitTo verify that the heart rate display is operational Breaking in the EquipmentVerifying that the Heart Rate Display is Operational Page Installing the Console Threading the Cable Assembly To thread the cable assemblyConnecting Cables Completing the Console Installation To complete the installationSelf-Powered Features Minimum requirements for operation Equipment Rate of MotionSymptoms of a Low Battery Informational Displays Prior to ShutdownUsing the Optional Power Adapter Optional Power Adapter KitReplacing the Battery Maintenance Daily CleaningWeekly Maintenance Daily InspectionMonthly Maintenance Long-Term Storage Storing the Chest StrapMoving the Equipment Warranty Periods and Coverage Commercial Cardiovascular Equipment Limited WarrantyLimited Warranty Conditions and Restrictions Exclusive Remedies Exclusion of Consequential and Incidental Damages Complete this portion and keep for your recordsPage Page Page Precor Incorporated