Precor EFX 821 manual Attaching the Caps and Upright Support Cover

Page 25

Assembling the EFX

23

Attaching the Caps and Upright Support Cover

You will need the arm caps and foot covers to complete the following tasks.

To attach the caps and upright support covers:

1.Align the cut-out inside the link arm cap with the link arm mounting hole. Apply pressure to the cap until it snaps into place.

Figure 11: Attaching the link and pivot arm caps

2. Attach the pivot arm caps.

Figure 12: Attaching the upright support covers

3.Place one inner and one outer upright support cover around an upright support. Align each pair so the arrows on the covers point toward the front of the unit. Apply pressure to engage the inner cover protrusions with the outer cover screw holes.

Image 25

Contents Page Page Page Trademark Note Edition InformationIntellectual Property Notice Safety Precautions Important Safety InstructionsPage  Do not lean on or pull on the console at any time Hazardous Materials and Proper Disposal Educating UsersProduct Recycling and Disposal Regulatory Notices for Cardiovascular Exercise Equipment Industry Canada 240 V Equipment Designated for U.S. MarketsEuropean Applications Obtaining Updated Documentation Obtaining ServicePage Table of Contents Page Assembling the EFX  Set up the unit on a solid, flat surface Installation Requirements Insert all fasteners with your fingers Hardware Kit not to scale Required ToolsFasteners Assembling the EFX To begin assemblyImportant Place excess cable inside the upright support Installing the Display Console MountAttaching the side bolts To install the bottle holder Installing the Bottle HolderTo install the moving handlebars Installing the HandlebarsAttaching the movable arms To attach the caps and upright support covers Attaching the Caps and Upright Support CoverTo level the unit Making Sure the Unit is StableVerifying that the Heart Rate Display is Operational Breaking in the EquipmentTo verify that the heart rate display is operational Page Installing the Console To thread the cable assembly Threading the Cable AssemblyConnecting Cables To complete the installation Completing the Console InstallationMinimum requirements for operation Equipment Rate of Motion Self-Powered FeaturesInformational Displays Prior to Shutdown Symptoms of a Low BatteryOptional Power Adapter Kit Using the Optional Power AdapterReplacing the Battery Daily Cleaning MaintenanceDaily Inspection Weekly MaintenanceMonthly Maintenance Moving the Equipment Storing the Chest StrapLong-Term Storage Limited Warranty Commercial Cardiovascular Equipment Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental DamagesPage Page Page Precor Incorporated