Precor EFX 821 manual Installing the Handlebars, To install the moving handlebars

Assembling the EFX 21

Installing the Handlebars

CAUTION: Handlebars can swing and cause injury. Have your assistant hold the handlebar and gently lower it into a vertical position when the handlebar assembly is complete.

To install the moving handlebars:

1.For proper alignment, rotate the pivot arm to a horizontal position. Apply pressure to fit the protrusion on the handlebar into the handlebar bracket.

Figure 8: Handlebar and bracket attachment

2.Insert three socket head cap screws, three split washers, and three washers through each handlebar bracket. To secure the handlebars, wrench tighten the fasteners using a ¼-inch hex key.

Figure 9: Upper body handlebar attachment detail