32 | Operating and Maintaining the P10 Console |
Using the Treadmill Safety Clip
The treadmill is equipped with two different stop functions, which behave as follows:
If the user … | Then the | And the console … |
| treadmill belt … |
|
Pulls on the lanyard | Slows to a stop. | Shows the words PUSH |
attached to the safety |
| TO RESET SWITCH. On |
clip and trips the |
| some console models, an |
restart switch. |
| arrow points toward the |
|
| Restart switch. |
Presses down on the | Slows to a stop. | Shows that the exercise |
red STOP button. |
| workout is paused. |
The restart switch is located just below the console and immediately behind the red STOP button, as shown in the following figure. When it is tripped, the bar pops up, displaying the words PUSH TO RESET on its front side. The treadmill does not operate while these words are visible.
Figure 6: Restart switch
Instruct users on how important it is to use the safety clip while exercising on the treadmill, and demonstrate how they should attach it to their clothing near the waistline.