46 | Assembling and Maintaining TRM | ||
| Table 3. P30 and P10 internal cable connections | ||
| Cable | Connector Type | Circuit |
|
|
| Connector |
|
|
| Location |
| Safety key (treadmills |
| |
| only) |
|
|
| Automatic stop sensor |
| |
| (treadmills only) | keyed |
|
| Data from base unit |
| |
|
| on flat gray cable |
|
| Heart rate sensors |
| |
|
| keyed |
|
| CSAFE |
| |
|
| on flat gray cable |
|
Completing the Console Installation (P30 and P10)
Before you complete the final installation steps,
To complete the installation:
1.Feed extra cable back into the neck tube.
2.Tilt the control console backward (toward yourself) until the tab on the top edge of its back plate slides along the top edge of the console mount and the screw holes align properly.
3.Insert the four