Precor P10 manual Completing Assembly, To secure the fasteners

28 Assembling and Maintaining TRM 800-Series Treadmills

8.Secure the fairing assembly using six buttonhead screws and six washers. Partially tighten the fasteners.

Figure 12: Handrail and console assembly attachment

Completing Assembly

After the upright supports and the fairing are in place, replace the hood on the treadmill base and finish securing the fasteners.

CAUTION: Be aware of the handrail extensions when you are working around the front of the unit. It is easy to bump your head or sustain other injuries if you ignore the location of the handrail extensions.

To secure the fasteners:

1.Using an alternating order, tighten the eight fasteners that secure the upright supports to the treadmill base.

2.Fully tighten the six screws that secure the console fairing to the upright supports.