ProForm PATL40707.0 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 12

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur- 1 rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Plug the power cord into an appropriate outlet that is
		2
properly installed and earthed in accordance with all local codes and		2

ordinances. Important: The treadmill is not compatible with
GFCI-equipped outlets.

Socket on Treadmill

Power

Cord

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

12

Image 12

Contents QUESTIONS? Model No. PATL40707.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedPage Careful not to pinch the Upright Wire Fully tighten the Bolts yetNot fully fold the Frame yet Not overtighten the Nut the Wheel must turn FreelyInsert the indicated connectors into the Right Upright Be careful not to pinch the wires Pull on the sleeve to make sure that it is locked into placeRaise the Frame 56 to the position shown Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to Personalize Console SettingsSelect the user mode Select a default user setting HOW to Identify Yourself AS User 1 or UserSet the date and time HOW to USE the Manual Mode HOW to USE a Preset Workout or a Weight Loss Workout Press the Start button to start the workout HOW to Create a Learn Workout Select a learn workoutHOW to USE a Learn Workout Change the workout if desired HOW to View the Fitness Journal HOW to Reset the Fitness Journal Select the user mode. See on Reset the fitness journalExit the user mode Information ModeHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0907A Key No. Qty DescriptionQty R1207B Exploded Drawing B-Model No. PATL40707.0 Exploded Drawing C-Model No. PATL40707.0 Exploded Drawing D-Model No. PATL40707.0 Ordering Replacement Parts Limited WarrantyIcon Authorized Dealer