ProForm PATL40707.0 user manual

Page 7

2.With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet.

Remove and discard the two indicated bolts (A) and the shipping bracket (B).

Cut the tie securing the Upright Wire (38) to the Base (83). Locate the tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole.

Attach a Base Pad (81) to the Base (83) in the location shown with a Base Pad Spacer (13) and a 1" Tek Screw (2). Then, attach another Base Pad (81) with only a 1" Tek Screw.

3.Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely.

4.Identify the Right Upright (78) and the Right Upright Spacer (79), which are marked with stickers. Insert the Upright Wire (38) through the Right Upright Spacer as shown.

See the inset drawing. Tie the wire tie in the Right Upright (78) securely around the end of the Upright Wire (38). With the help of a second person, hold the Right Upright near the Base (83). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright.

2
	B	A
	B	38
		38
	Hole
83		81
56		81
56
		2
		Tie
13
81
2
3
	83
4
	84
8
4
		78
38
		38
	83	79
	83
78

38 Wire

Tie

7

Image 7

Contents Model No. PATL40707.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Make sure that the power cord is unplugged AssemblyPage Not overtighten the Nut the Wheel must turn Freely Careful not to pinch the Upright WireFully tighten the Bolts yet Not fully fold the Frame yetInsert the indicated connectors into the Right Upright Pull on the sleeve to make sure that it is locked into place Be careful not to pinch the wiresRaise the Frame 56 to the position shown HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Personalize Console Settings HOW to Turn on the PowerSelect the user mode HOW to Identify Yourself AS User 1 or User Select a default user settingSet the date and time HOW to USE the Manual Mode HOW to USE a Preset Workout or a Weight Loss Workout Press the Start button to start the workout Select a learn workout HOW to Create a Learn WorkoutHOW to USE a Learn Workout Change the workout if desired HOW to View the Fitness Journal Information Mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal Exit the user modeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description R0907AQty R1207B Exploded Drawing B-Model No. PATL40707.0 Exploded Drawing C-Model No. PATL40707.0 Exploded Drawing D-Model No. PATL40707.0 Limited Warranty Ordering Replacement PartsIcon Authorized Dealer