ProForm PATL40707.0 user manual Careful not to pinch the Upright Wire, Fully tighten the Bolts yet

5. Hold a Bolt Spacer (80) inside the lower end of	5		6
the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt
(6) with a 3/8" Star Washer (9) into the Right	78
Upright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (80), 3/8" x 4 1/2"			9
Bolt (6), and 3/8" Star Washer (9).
Hold the Right Upright Spacer (79) and the			38
				80
Right Upright (78) against the Base (83). Be
careful not to pinch the Upright Wire (38).
Finger tighten the 3/8" x 4 1/2" Bolts (6); do not			80	77
fully tighten the Bolts yet.
			79
Press a Base Endcap (77) into the Base (83).
	83
6. With the help of a second person, carefully tip	6
the treadmill onto its right side. Partially fold the		B
	A
Frame (56) so the treadmill is more stable; do
not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).		83
Attach a Base Pad (81) to the Base (83) in the	81		56
location shown with a 1" Tek Screw (2) and a				4
Base Pad Spacer (13). Then, attach another	2
Base Pad (81) with only a 1" Tek Screw (2).
Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and		13
the 3/8" Nut (8) that you removed in step 1. Do			84
not overtighten the Nut; the Wheel must turn
		2	81
freely.
			8
7. With the help of a second person, hold a Bolt	7
Spacer (80) inside the lower end of the Left
Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a	6		74
3/8" Star Washer (9) into the Left Upright and
the Bolt Spacer. Repeat this step with a second	9
Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6), and 3/8"
Star Washer (9).		76
Orient the Left Upright (74) and the Left Upright	80
Spacer (76) as shown. Hold the Left Upright
Spacer and the Left Upright against the Base
(83). Finger tighten the two 3/8" x 4 1/2" Bolts	80
(6); do not fully tighten the Bolts yet.	77	83
Press a Base Endcap (77) into Base (83).
	8