ProForm 831.293062 user manual Follow your progress with the displays, Put it in a safe place

Page 13

To stop the program temporarily, press the Stop button. The Time/Pace display will begin to flash.

To restart the program, press the Start button or the Speed button. To end the program, press

the Stop button, remove the key, and then reinsert the key.

4 Follow your progress with the displays.

See step 5 on page 10.

5

Measure your heart rate if desired.

 

 

See step 6 on page 11.

 

 

 

Turn on the fan if desired.

 

 

6

 

 

 

See step 7 on page 11.

 

 

 

When the program is finished, remove the key

7

from the console.

 

 

 

When the program has ended,

make sure that

 

the incline of the treadmill is at the lowest set-

 

ting. Next, remove the key from the console and

 

put it in a safe place.

Note: If the displays and

various indicators on the console remain lit after the key is removed, the console is in the “demo” mode. Refer to page 20 and turn off the demo mode.

When you are finished using the treadmill, move the on/off circuit breaker switch near the power cord to the off position and unplug the power cord.

HOW TO USE HEART RATE PROGRAMS

 

CAUTION:

If you have heart prob-

lems, or if you are over 60 years of age and have been inactive, do not use the heart rate programs. If you are taking medication regu- larly, consult your physician to find whether the medication will affect your exercise heart rate.

Follow the steps below to use a heart rate program.

Note: You must wear the optional chest pulse sen- sor (see page 20) to use a heart rate program.

1

Put on the chest pulse sensor.

 

 

 

See the instructions included with the optional

 

 

chest pulse sensor.

 

 

2

Insert the key fully into the console.

 

 

 

See HOW TO TURN ON THE POWER on page

 

 

 

10.

 

 

3

Select a heart rate program.

 

 

 

When the key

 

 

 

is inserted, the

 

 

 

manual mode

 

 

 

will be se-

 

 

 

lected. To se-

 

 

 

lect a heart

 

 

 

rate program,

 

 

 

press the Program Select button repeatedly until

 

 

one of the two heart rate program indicators lights.

 

 

The two profiles on the left side of the matrix show

 

how the target heart rate will change during the

 

 

programs. During heart rate program 1, your heart

 

 

rate will reach approximately 85% of your

esti-

 

mated maximum heart rate;

during heart rate pro-

gram 2, your heart rate will reach approximately 80% of your estimated maximum heart rate. Note: Your estimated maximum heart rate is de- termined by subtracting your age from 220. For example, if you are 30 years old, your estimated maximum heart rate is 190 beats per minute

(220 – 30 = 190).

13

Image 13
Contents Serial Number Decal Model No Serial NoImportant Precautions Table of ContentsNever insert any object into any opening Move the Treadmill onDecals shown have been placed on your treadmill. If a Before YOU Begin Using the treadmillBack Make sure that the power cord is unplugged AssemblyPart is missing, call toll-free Uprights 80, 84 as shown Wire Wires on the sides of the Console BaseMay be preattached to the Left Upright Loosen the Upright Bolts two to three turnsTreadmill on Make sure that no wires are pinched.Reattach107 CylinderPerformant Lube HOW to Plug in the Power CordThis product must be grounded.If it should malfunc Grounded Outlet BoxSettes, call toll-free Features of the ConsoleHOW to USE the Manual Mode Display Calories/PulseDistance/Incline dis AvoidSelect one of the preset programs HOW to USE Preset ProgramsPress the Start button or the Speed Start the programFollow your progress with the displays From the console When the program has endedPut it in a safe place Turn on the fans if desired Enter your age and a maximum speed settingFrom the console HOW to Connect Your Portable Stereo HOW to Connect Your Portable CD PlayerCassettes HOW to Connect Your Computer HOW to Connect Your Home StereoPlug the adapter into the Line OUT jack on your stereo Plug the adapter into an RCA Y-adapter availablePrograms HOW to Connect Your VCRVCR Start button or the Speed button on the console Next settings of the CD or video programMake sure that the audio cable is properly See onHOW to USE Programs Directly from OUR WEB Site HOW to Level the Treadmill Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Solution TroubleshootingPower Cord Unplug Power Cord Problem The walking belt slows when walked onIf the walking belt is off-center Belt has shifted to the leftExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Motor Pulley Description Key No. QtyWasher QtyKey No. Qty Description Part Identification Chart101 Console Base 120 Right Top Handgrip 102 Optic Disk 121 107 Console 126Exploded R0803A Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Full ONE Year WarrantyPart No R0803A