ProForm 985 user manual Be careful not to pinch the wires in the Right Handrail

Page 11

11. Be careful not to pinch the wires in the Right

11

 

Handrail (78).

 

Attach the console assembly to the Right

Console Assembly

 

Handrail (78) with two #8 x 3/4" Screws (1), a

 

 

1/4" x 1 1/4" Bolt (4), and a 1/4" Star Washer

 

 

(10). Repeat this step on the left side of the

78

 

console assembly. Start all four Screws and

 

both Bolts before tightening any of them.

 

 

See step 7. Tighten the four 1/4" x 5/8" Bolts

 

 

(3).

1

 

 

10

 

 

 

 

4

12. If necessary, press the Left Accessory Tray (96)

12

 

and the Right Accessory Tray (97) into the

96

Console Base (98).

 

 

98

97

 

 

13. Carefully lower the Uprights (81, 83).

13

81

Tighten the two 3/8" x 1 1/2" Patch Bolts (6) and

the two 3/8" x 3 1/2" Patch Bolts (8).

 

8

Raise the Uprights (81, 83).

 

83

6

 

 

 

6 8

 

 

11

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents On the WEB QUESTIONS?Model No. PFTL16008.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Pulse sensors are not medical devices Important PrecautionsPage Before YOU Begin Assembly Page Overtighten the Nut the Wheels must turn Freely Pinch the Wire Harness 84. Partially tighten Bolts touch the Base do not fully tighten Patch Bolts yet Not fully fold the Frame yetTighten the Bolts yet Touch the Base do not fully tighten the Patch Bolts yetTogether easily and snap into place. If they do Inset drawing. The connectors should slideFul not to pinch the wires Be careful not to pinch the wires in the Right Handrail Raise the Frame 51 to the position shown Chest Pulse Sensor Care and Maintenance HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeMeasure your heart rate if desired Select one of the preset workouts. To select one HOW to USE a Preset WorkoutInsert an iFit card and select a workout HOW to USE AN Ifit WorkoutHOW to Adjust the Cushioning System Information ModeHOW to USE the Stereo Sound System HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Move the Treadmill Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The walking belt slows when walked onTurn if the walking belt has shifted to the right Problem The chest pulse sensor does not function properlyExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL16008.0Qty Exploded Drawing A-Model No. PFTL16008.0 R0109A Exploded Drawing B-Model No. PFTL16008.0 R0109A Exploded Drawing C-Model No. PFTL16008.0 R0109A Exploded Drawing D-Model No. PFTL16008.0 R0109A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents