7.Attach the Left Handrail (88) to the Left Upright (89) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (11), and a 5/16" x 1 1/4" Bolt (4).
Do not fully tighten the Screws and Bolt yet.
Attach the Right Handrail (87) in the same way.
8.Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Remove the two Screws (A). Next, lift off the Crossbar (93). Discard the two Screws.
9.IMPORTANT: To avoid damaging the Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9) or the #10 x 3/4" Flat Head Screws (28).
Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with two #10 x 3/4" Flat Head Screws (28), two #10 x 3/4" Screws (9), and two 1/4" Star Washers (35) as shown. Start all four Screws, and then tighten them.
7 |
|
|
|
|
| 4 | 87 |
|
| 11 | |
11 | 5 | 5 |
|
|
| ||
4 |
| 88 |
|
|
|
| |
89 |
|
|
|
8 |
| Console |
|
| |
|
| Assembly |
| A |
|
| 93 |
|
9 | 9 | 28 |
| ||
|
| 35 |
9 | 93 | 87 |
28 |
| |
35 |
|
|
| 88 |
|
10