8. Raise the Frame (67) to the position shown. | 8 |
|
|
|
Have a second person hold the Frame until |
|
|
| |
this step is completed. |
|
|
|
|
Orient the Storage Latch (87) so that the large |
|
|
|
|
barrel and the latch knob are in the positions |
|
|
|
|
shown. |
|
|
|
|
Remove the tie from the upper end of the |
| 67 |
|
|
Storage Latch (87). Attach the upper end of the |
|
|
| |
Storage Latch to the bracket on the Frame (67) |
|
|
|
|
with a 3/8" x 1 3/4" Bolt (3) and a 3/8" Jam Nut |
| 7 |
|
|
(7). |
| 3 87 |
| |
Remove the tie from the lower end of the |
|
|
| |
Storage Latch (87). Keep the holes in the latch | Latch |
| Large |
|
cap aligned with the holes in the Storage Latch. |
|
| ||
Make sure to keep the latch cap inside the | Knob |
| Barrel |
|
Storage Latch. Attach the Storage Latch to the |
|
|
|
|
bracket on the Base (103) with a 3/8" x 2" Bolt |
|
|
|
|
(4) and a 3/8" Jam Nut (7). Note: It may be nec- |
|
|
|
|
essary to move the Frame (67) back and forth |
|
|
|
|
slightly to align the Storage Latch with the |
| 103 |
|
|
bracket. |
| 7Latch | 4 | |
Lower the Frame (67) (see HOW TO LOWER |
|
| ||
THE TREADMILL FOR USE on page 24). |
|
| Cap |
|
9. With the help of a second person, raise the | 9 |
|
|
|
front of the treadmill and insert the crossbar on |
|
|
| |
the Base (103) into the cutout in the cardboard |
|
|
|
|
stand as shown. Have the second person |
|
|
|
|
hold the treadmill to prevent it from moving |
|
|
|
|
forward or backward. |
|
|
| 5 |
Firmly tighten the four 3/8" x 3 3/4" Bolts (5). |
|
|
| |
With the help of the second person, lower the |
|
|
|
|
treadmill off the cardboard stand. |
| 103 |
|
|
| 5 |
| Cardboard | |
|
|
| ||
|
|
|
| Stand |
10.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27). To protect the floor or carpet from damage, place a mat under the treadmill. Extra hardware may be included.
10