HOW TO USE THE IFIT LIVE MODE
The iFit Live mode enables the treadmill to communi- cate with your wireless network. With the iFit Live mode, you can download personalized workouts, cre- ate your own workouts, track your workout results, and access many other features. See www.iFit.com for complete information.
1.Connect your treadmill to your own wireless network.
See steps 1 and 2 on pages 20 and 21.
To activate and use the iFit Live mode, you must have your own wireless network. You must have an 802.11b router with SSID broadcast enabled (hidden networks are not supported). You will also need an iFit.com membership.
2.Select the iFit Live mode.
To select the iFit Live mode, first select the start menu (see step 2 on page 13). Next, press the Workouts button. Then, press the Live Workouts button. You can also press the Live Workouts but- ton on the console.
To set up an iFit Live account, or for more informa- tion about the iFit Live mode, go to www.iFit.com. To switch users, press the Switch User button in the lower right corner of the screen. Then, select the desired user.
IFIT LIVE FCC INFORMATION
IMPORTANT: To comply with FCC and IC RF expo- sure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all per- sons and must not be
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gen- erates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in- structions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is en- couraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit dif- ferent from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV tech- nician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connect- ing to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired oper- ation.
If you have questions after reading this information, please call Customer Care
19