ProForm 1080 warranty Cardboard

Page 13

16. Make sure that there is a piece of cardboard

16

 

IMPORTANT:

below the rear of the Frame (56).

 

IMPORTANT: See page 15 and plug in the

 

 

Make sure to follow

power cord. Next, see page 17 and turn on

 

 

all instructions in

the power.

 

 

this step

Then, press the Incline increase button

 

 

 

once.

 

 

 

When the Frame (56) stops moving, remove

 

 

 

the key from the console and unplug the

 

 

 

power cord.

 

 

 

 

56

 

Cardboard

17. IMPORTANT: Before you begin this step,

17

 

 

make sure that you have read and followed

 

 

all the instructions in step 16.

 

 

 

Raise the Frame (56) to the position shown.

56

 

 

Have a second person hold the Frame until

 

 

this step is completed.

12

 

 

Orient the Storage Latch (53) so that the large

6

 

barrel and the latch knob are oriented as shown.

 

 

Attach the upper end of the Storage Latch (53)

 

 

53

to the bracket on the Frame (56) with a 3/8" x

Latch

 

1 3/4" Bolt (6) and a 3/8" Nut (12).

 

 

Attach the lower end of the Storage Latch (53) to

Knob

 

 

the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"

Large

 

 

Nut (12). Note: It may be necessary to move the

Barrel

 

 

Frame (56) back and forth to align the Storage

 

 

 

Latch with the Base.

 

 

 

 

94

12

3

 

13

 

 

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model No. PFTL11010.0 Serial No QUESTIONS?Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Wrench Scissors AssemblySee the inset drawing. Tie the wire tie Make sure that the power cord is unpluggedTighten the Bolts yet. Note Use the short hex Be careful not to pinch the UprightAttach the Right Upright not shown Base Covers into place yetAttach the Right Handrail 87 in the same way Shown. Start all four Screws, and then tighten Each of them Important To avoid damagingAgain. if YOU do not Connect the CON Them All four Bolts, and then tighten eachPage Cardboard Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console DiagramConsole HOW to USE the Manual Mode HOW to Turn on the PowerInsert the key into the console Select the start menuPage Measure your heart rate if desired. Before using Start the workout HOW to USE a SET-A-GOAL WorkoutStart the workout See on Connect your treadmill to your own wireless network HOW to USE the Ifit Live ModeSelect the iFit Live mode Ifit Live FCC InformationHOW to USE the Settings Mode HOW to USE the Stereo Sound SystemSelect the settings mode Select the wireless network modeExit the settings mode Change the international settingsLog in to your iFit Live account Calibrate the screen HOW to USE the Maintenance ModeView technical information Exit the maintenance modeHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingOutlets Top Problem The walking belt slows when walked onTurn if the walking belt has shifted to the right Problem The buttons on the screen do not work correctly Problem The iFit Live mode does not function correctlyExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents