ProForm 1080 warranty Log in to your iFit Live account, Change the international settings

Page 25

To use a static DNS, press the Use Static DNS button. Enter at least one DNS. Press the arrow buttons to view additional entry boxes. When you are finished, press the Submit button. To return to the advanced settings screen, press the Cancel button.

To use encryption, press the Use Encryption but- ton. Select the encryption type and enter the pass- word. When you are finished, press the Submit button. To return to the advanced settings screen, press the Cancel button. Note: If you turn on en- cryption on a non-encrypted network or select the wrong encryption type, the console will not function correctly.

If necessary, press the Cancel button to exit the advanced settings screen.

If you are having problems connecting, unencrypt your network, update your console firmware (see step 8 on page 27), and then encrypt your network. Note: The iFit Live mode supports unsecured and secured (WEP, WPA, and WPA2) encryption. A broadband connection is recommended; perfor- mance depends on connection speed.

Note: If you have questions after following these in- structions, go to www.iFit.com/support for assis- tance.

3.Log in to your iFit Live account.

To switch iFit Live accounts, touch the iFit Live Login button. Then, enter your user name and password using the keyboard on the screen. See step 2 on page 24 for instructions about using the keyboard. When you are finished, touch the Submit button. To return to the settings mode, touch the Cancel button. Note: To switch users within an iFit Live account, see step 2 on page 23.

To set up an iFit Live account, or for more informa- tion about the account, go to www.iFit.com.

4.Change the international settings.

Press the International button to change the lan- guage and unit of measurement.

Press the Language button to select a different dis- play language for your console. Press the desired language. Then, press the Back button.

Press the US/Metric button to view the selected unit of measurement. Change the unit of measure- ment, if desired. Then, press the Back button. Press the Back button to return to the settings mode.

5.Turn on or turn off the display demo mode. The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the con- sole will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the screen will show a preset presentation.

To turn on or turn off the display demo mode, first press the Demo Mode button. Next, press the On button or the Off button. Then, press the Back button.

6.Exit the settings mode.

To exit the settings mode, press the Back button.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model No. PFTL11010.0 Serial No QUESTIONS?Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Wrench Scissors AssemblySee the inset drawing. Tie the wire tie Make sure that the power cord is unpluggedTighten the Bolts yet. Note Use the short hex Be careful not to pinch the UprightAttach the Right Upright not shown Base Covers into place yetAttach the Right Handrail 87 in the same way Shown. Start all four Screws, and then tighten Each of them Important To avoid damagingAgain. if YOU do not Connect the CON Them All four Bolts, and then tighten eachPage Cardboard Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console DiagramConsole HOW to USE the Manual Mode HOW to Turn on the PowerInsert the key into the console Select the start menuPage Measure your heart rate if desired. Before using Start the workout HOW to USE a SET-A-GOAL WorkoutStart the workout See on Connect your treadmill to your own wireless network HOW to USE the Ifit Live ModeSelect the iFit Live mode Ifit Live FCC InformationHOW to USE the Settings Mode HOW to USE the Stereo Sound SystemSelect the settings mode Select the wireless network modeExit the settings mode Change the international settingsLog in to your iFit Live account Calibrate the screen HOW to USE the Maintenance ModeView technical information Exit the maintenance modeHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingOutlets Top Problem The walking belt slows when walked onTurn if the walking belt has shifted to the right Problem The buttons on the screen do not work correctly Problem The iFit Live mode does not function correctlyExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents