ProForm 1080 warranty Problem The iFit Live mode does not function correctly

Page 31

b. If the walking belt slips when walked on, first re-	b
move the key and UNPLUG THE POWER CORD.	b
Using the hex key, turn both idler roller bolts clock-
wise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in. (5 to 7 cm) off
the walking platform. Be careful to keep the walk-
ing belt centered. Then, plug in the power cord, in-
sert the key, and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is
properly tightened.
PROBLEM: The iFit Live mode does not function correctly
SOLUTION: a. If the iFit Live mode is not functioning correctly, make sure that the treadmill has the most current
firmware available (see step 8 on page 27).
PROBLEM: The treadmill will not connect to the wireless network
SOLUTION: a. Perform a network test (see step 6 on page 27).
b. Make sure the wireless settings on your console are correct (see step 2 on page 24).

c.Make sure the settings for your wireless network are correct.

d.If you still have questions, see the front cover of this manual.

PROBLEM: The buttons on the screen do not work correctly

SOLUTION: a. If the screen is not properly calibrated, it will be difficult to touch the correct buttons on the screen. To calibrate the screen, see step 5 on page 26.

31

Image 31

Contents On the WEB QUESTIONS?Model No. PFTL11010.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Wrench Scissors AssemblySee the inset drawing. Tie the wire tie Make sure that the power cord is unpluggedBase Covers into place yet Be careful not to pinch the UprightTighten the Bolts yet. Note Use the short hex Attach the Right Upright not shownAttach the Right Handrail 87 in the same way Shown. Start all four Screws, and then tighten Each of them Important To avoid damagingAgain. if YOU do not Connect the CON Them All four Bolts, and then tighten eachPage Cardboard Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console DiagramConsole Select the start menu HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consolePage Measure your heart rate if desired. Before using Start the workout HOW to USE a SET-A-GOAL WorkoutStart the workout See on Ifit Live FCC Information HOW to USE the Ifit Live ModeConnect your treadmill to your own wireless network Select the iFit Live modeSelect the wireless network mode HOW to USE the Stereo Sound SystemHOW to USE the Settings Mode Select the settings modeExit the settings mode Change the international settingsLog in to your iFit Live account Calibrate the screen HOW to USE the Maintenance ModeView technical information Exit the maintenance mode HOW to Lower the Treadmill for USE HOW to Fold and Move the Treadmill HOW to Fold the Treadmill HOW to Move the TreadmillProblem The power turns off during use TroubleshootingOutlets Top Problem The walking belt slows when walked onTurn if the walking belt has shifted to the right Problem The buttons on the screen do not work correctly Problem The iFit Live mode does not function correctlyExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT