ProForm 1080 warranty Assembly, Wrench Scissors

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own Phillips screwdriver

, adjustable

wrench

, and scissors

.

 

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam- aging parts, do not use power tools for assembly. Extra hardware may be included.

1/4" Star

5/16" Flat

5/16" Star

3/8" Star

 

3/8" Nut (12)–2

Washer (35)–6

Washer (113)–4

Washer (11)–4

Washer (13)–4

 

#8 x 1/2" Screw

#8 x 1/2" Ground

#8 x 3/4" Screw

#10 x 3/4" Screw

#10 x 3/4" Flat

(1)–18

Screw (10)–1

(2)–8

(9)–2

 

Head Screw (112)–2

5/16" x 1"

5/16" x 1 1/4"

3/8" x 1 1/4" Bolt (8)–4

3/8" x 1 3/4" Bolt (6)–1

Bolt (5)–4

Bolt (4)–2

1/4" x 1/2"

3/8" x 2" Bolt (3)–1

3/8" x 2 3/4" Bolt (7)–4

Bolt (36)–4

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL11010.0 Serial No On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Assembly Wrench ScissorsMake sure that the power cord is unplugged See the inset drawing. Tie the wire tieAttach the Right Upright not shown Be careful not to pinch the UprightTighten the Bolts yet. Note Use the short hex Base Covers into place yetAttach the Right Handrail 87 in the same way Important To avoid damaging Shown. Start all four Screws, and then tighten Each of themAgain. if YOU do not Connect the CON All four Bolts, and then tighten each ThemPage Cardboard Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Diagram Features of the ConsoleConsole Insert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the start menuPage Measure your heart rate if desired. Before using HOW to USE a SET-A-GOAL Workout Start the workoutStart the workout See on Select the iFit Live mode HOW to USE the Ifit Live ModeConnect your treadmill to your own wireless network Ifit Live FCC InformationSelect the settings mode HOW to USE the Stereo Sound SystemHOW to USE the Settings Mode Select the wireless network modeChange the international settings Exit the settings modeLog in to your iFit Live account HOW to USE the Maintenance Mode Calibrate the screenExit the maintenance mode View technical informationHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useOutlets Problem The walking belt slows when walked on TopTurn if the walking belt has shifted to the right Problem The iFit Live mode does not function correctly Problem The buttons on the screen do not work correctlyWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents