HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs speakers, you must connect your MP3 player, CD player, or other personal audio player to the console. Locate the audio wire. Plug one end into the audio jack on the side of the console. Then, plug the other end into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Then, adjust the volume level on your personal audio player or press the Volume increase and decrease buttons on the console.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
Note: The USB port on the side of the console is for software updates only. Plug a USB drive into the USB port only if instructed to do so by an authorized service representative.
HOW TO USE THE SETTINGS MODE
The console features a settings mode that allows you to connect your treadmill to your own wireless network and to log in to your iFit Live account. The settings mode also allows you to select a display language, to select the unit of measurement, and to turn on and turn off the display demo mode.
1.Select the settings mode.
Insert the key into the console (see step 1 on page 17). Next, select the start menu (see step 2 on page 17). Then, press the i button in the lower right corner of the screen to select the settings mode.
2.Select the wireless network mode.
Press the Wireless Network button on the screen. You must have your own wireless network and an 802.11b/g router with SSID broadcast enabled (hidden networks are not supported).
If your wireless network is unencrypted and does not require a password, go to step 2a. If your wireless network is encrypted and re- quires a password, go to step 2b.
2a. Connect your treadmill to an unencrypted wireless network.
Press the Connect button for the desired wireless network. When the Disconnect button appears, your exercise equipment is connected to the wire- less network. Then, press the Done button. Go to step 3.
2b. Connect your treadmill to an encrypted wireless network.
To connect to your encrypted network, press the Connect button for the desired wireless network. Enter your password in the Key/Passphrase entry box and then press the Submit button.
To use numbers or other characters on the key- board on the screen, press the .?123 button or the #+= button. To return to the letter keyboard, press the ABC button. To capitalize a character, press the button with an
To use advanced settings, press the Advanced button for the desired wireless network.
To use a static IP address, press the Use Static IPs button. Enter the IP address, netmask, gate- way IP address, and at least one DNS. Press the arrow buttons to view additional entry boxes. When you are finished, press the Submit button. To re- turn to the advanced settings screen, press the Cancel button.
24