7. Orient the Rear Frame Cover (23) as shown. | 7 | |
While a second person tips the elliptical exercis- | ||
| ||
er forward, attach the Rear Frame Cover to the |
| |
Base (1) with four M4 x 65mm Screws (91) and |
| |
two M4 x 16mm | 23 | |
| ||
| 79 | |
| 1 | |
| 91 | |
8. Have a second person hold the Upright (6) near | 8 | |
the Frame (2) as shown. | ||
| ||
Pull the Wire Harness (48) out of the Frame (2) | 48 | |
and insert it upward through the Upright (6). Tip: | 6 | |
Use a piece of tape or an elastic band to hold |
| |
the Wire Harness in place until step 14. |
| |
Insert the Upright (6) into the Frame (2). Tip: | 2 | |
Start all screws before tightening any of | 95 | |
them. Attach the Upright with three M8 x 16mm | ||
95 | ||
Button Screws (95). Avoid pinching the Wire | ||
Avoid pinching the | ||
Harness (48) between the Upright and the | ||
Wire Harness (48) | ||
Frame. | ||
during this step | ||
|
9. Apply a generous amount of grease to the Pivot | 9 |
|
Axle (65) and insert it into the Frame (2). |
| |
86 |
| |
|
| |
Orient the two Frame Covers (17) as shown. |
|
|
Attach the Frame Covers to the Frame (2) with |
|
|
four M4 x 16mm Screws (86). |
| 2 |
|
| |
| 17 | 17 |
|
| Grease |
|
| 86 |
|
| 65 |
| 9 |
|